[TUTORIAL] HOW TO CRACK NETFLIX PREMIUM ACCOUNTS [EASY] FOR BEGINNERS

[Mr.Robot]

Requirements:

_Sentry MBA
_Netflix Config
_Proxies
_Combos


Method:

Getting Started

click "settings" on the left, then "general"

click "load settings from snapshot"

click "lists" on the left, then "proxylist"

click the open button on the right to select a proxy list to use

click "wordlist" on the left

make sure "mode" is set to "combo list"

click the open button to select a combo list

optionally, you could use the open buttons next to usernames & passwords to open their respective usernames wordlist and passwords wordlists.

click "progression" on the left, then "progression" (underneath)

click the "reload list" (green refresh button) on the top right to reload your combolist (to ensure you're using the correct combolist, and not an old one)

slide the "bots" slider to an appropriate number of workers you'd like to use

click "start" on the top left


The main thing to pay attention to here, to determine whether or not we're cracking correctly, is the HTTP responses. These codes are essential to know if our requests are getting through okay. "Hits" are what we're aiming for. "Reds" are redirects. "Fakes" are, well, fakes. Sentry MBA if configured correctly, can determine when there is a fake response from the server - saving you time when cracking. "To check" is just the remaining amount of combos or usernames:passwords Sentry MBA has left to go through, with your wordlist.




A LIKE WOULD BE VERY APPRECIATED! Fiesta Fiesta

 

[bangoo7786]

heyy

 

[kartikey1234]

don

 

[savaroainas]

nice

 

[bobbo1]

Krav:

_Vapnet MBA
_Netflix Config
_Ombud
_Kombos


Metod:

Komma igång

klicka på "inställningar" till vänster och sedan på "allmänt"

klicka på "ladda in inställningar från ögonblicksbild"

klicka på "listor" till vänster och sedan på "proxylist"

klicka på öppna-knappen till höger för att välja en proxylista att använda

klicka på "ordlista" till vänster

se till att "läge" är inställt på "kombinationslista"

klicka på öppna-knappen för att välja en kombinationslista

alternativt kan du använda öppna-knapparna bredvid användarnamn och lösenord för att öppna deras respektive användarnamnsordlista och lösenordsordlistor.

klicka på "progression" till vänster och sedan på "progression" (under)

klicka på "reload list" (grön uppdateringsknapp) uppe till höger för att ladda om din combolist (för att säkerställa att du använder rätt combolist, och inte en gammal)

skjut "bots"-reglaget till ett lämpligt antal arbetare du vill använda

klicka på "start" uppe till vänster


Det viktigaste att vara uppmärksam på här, för att avgöra om vi spricker korrekt eller inte, är HTTP-svaren. Dessa koder är viktiga för att veta om våra förfrågningar går igenom okej. "Hits" är vad vi siktar på. "Röda" är omdirigeringar. "Fakes" är, ja, förfalskningar. Sentry MBA kan, om den är korrekt konfigurerad, avgöra när det finns ett falskt svar från servern - vilket sparar tid när du spricker. "Att kontrollera" är bara den återstående mängden av kombinationer eller användarnamn :passwords Sentry MBA har kvar att gå igenom, med din ordlista.




EN LIKE SKULLE VARA MYCKET UPPSKATTAT! Fiesta Fiesta

kanon

 

[riski]

Requirements:

_Sentry MBA
_Netflix Config
_Proxies
_Combos


Method:

Getting Started

click "settings" on the left, then "general"

click "load settings from snapshot"

click "lists" on the left, then "proxylist"

click the open button on the right to select a proxy list to use

click "wordlist" on the left

make sure "mode" is set to "combo list"

click the open button to select a combo list

optionally, you could use the open buttons next to usernames & passwords to open their respective usernames wordlist and passwords wordlists.

click "progression" on the left, then "progression" (underneath)

click the "reload list" (green refresh button) on the top right to reload your combolist (to ensure you're using the correct combolist, and not an old one)

slide the "bots" slider to an appropriate number of workers you'd like to use

click "start" on the top left


The main thing to pay attention to here, to determine whether or not we're cracking correctly, is the HTTP responses. These codes are essential to know if our requests are getting through okay. "Hits" are what we're aiming for. "Reds" are redirects. "Fakes" are, well, fakes. Sentry MBA if configured correctly, can determine when there is a fake response from the server - saving you time when cracking. "To check" is just the remaining amount of combos or usernames:passwords Sentry MBA has left to go through, with your wordlist.




A LIKE WOULD BE VERY APPRECIATED! Fiesta Fiesta

thanks u

 

[ewrrewaeawc]

Requirements:

_Sentry MBA
_Netflix Config
_Proxies
_Combos


Method:

Getting Started

click "settings" on the left, then "general"

click "load settings from snapshot"

click "lists" on the left, then "proxylist"

click the open button on the right to select a proxy list to use

click "wordlist" on the left

make sure "mode" is set to "combo list"

click the open button to select a combo list

optionally, you could use the open buttons next to usernames & passwords to open their respective usernames wordlist and passwords wordlists.

click "progression" on the left, then "progression" (underneath)

click the "reload list" (green refresh button) on the top right to reload your combolist (to ensure you're using the correct combolist, and not an old one)

slide the "bots" slider to an appropriate number of workers you'd like to use

click "start" on the top left


The main thing to pay attention to here, to determine whether or not we're cracking correctly, is the HTTP responses. These codes are essential to know if our requests are getting through okay. "Hits" are what we're aiming for. "Reds" are redirects. "Fakes" are, well, fakes. Sentry MBA if configured correctly, can determine when there is a fake response from the server - saving you time when cracking. "To check" is just the remaining amount of combos or usernames:passwords Sentry MBA has left to go through, with your wordlist.




A LIKE WOULD BE VERY APPRECIATED! Fiesta Fiesta

ad

 

[nyax_anonym]

Requirements:

_Sentry MBA
_Netflix Config
_Proxies
_Combos


Method:

Getting Started

click "settings" on the left, then "general"

click "load settings from snapshot"

click "lists" on the left, then "proxylist"

click the open button on the right to select a proxy list to use

click "wordlist" on the left

make sure "mode" is set to "combo list"

click the open button to select a combo list

optionally, you could use the open buttons next to usernames & passwords to open their respective usernames wordlist and passwords wordlists.

click "progression" on the left, then "progression" (underneath)

click the "reload list" (green refresh button) on the top right to reload your combolist (to ensure you're using the correct combolist, and not an old one)

slide the "bots" slider to an appropriate number of workers you'd like to use

click "start" on the top left


The main thing to pay attention to here, to determine whether or not we're cracking correctly, is the HTTP responses. These codes are essential to know if our requests are getting through okay. "Hits" are what we're aiming for. "Reds" are redirects. "Fakes" are, well, fakes. Sentry MBA if configured correctly, can determine when there is a fake response from the server - saving you time when cracking. "To check" is just the remaining amount of combos or usernames:passwords Sentry MBA has left to go through, with your wordlist.




A LIKE WOULD BE VERY APPRECIATED! Fiesta Fiesta

nice